CONFIGURE UE-BASED TESTS with 24 Ues in
10 MINUTES
Accelerate testing by configuring UE tests, and bands to be scanned on a single administration screen, and by quickly creating active voice call and data throughput test scripts using the intuitive drag-and-drop script builder. Commence walk or drive testing within 10 minutes of power-on.
Eliminate the need to understand spectrum allocation and channels to be tested, time-consuming manual programming of channels, and inevitable programming errors. Auto channel scanning and discovery identifies every deployed channel, faster than a dedicated scanner can. You won’t miss any bands, and every channel will be programmed correctly; even difficult-to-locate 5G SSB channels.
Replace slow, frustrating and problem-prone test setup and configuration, and software version management – and the all-too-common need for re-walks and re-drives – with CERNO'sᵀᴹ robust, highly reliable, single-box design.
You can be confident in the accuracy of the measurement data, and testers don’t need to be concerned about re-testing and log file corruption if a test stops unexpectedly. CERNO'sᵀᴹ resilient data storage system checks and stores all data reliably, with no more than a few seconds of test data being lost if power fails mid-test.
Quickly and easily convert CERNOᵀᴹ to drive testing mode by connecting a GPS receiver and using the inbuilt Slippy maps of your entire continent (North America, Europe, Asia, the Middle East, Australia/NZ). No additional training is required, and you save even more on CAPEX and OPEX.
Run separate voice call and data throughput test scripts on each UE simultaneously – so, there’s no need to run multiple passes, or to deploy multiple testers to cover all the testing you need.
Use CERNOᵀᴹ in scanning mode to outperform and replace costly, heavy and power-hungry scanners that can’t provide the measurement data that UE-based testing does with a true, single-device testing platform.
Use non-technically skilled testers by pre-configuring tests and using the auto-start feature. Testing, including the execution of scripted active tests, commence on power-up, so, all the tester has to do is to drive, or walk.
CERNOᵀᴹ makes full band-locked UE-based testing of every operator – technology – band combination in a single test pass viable for the first time. You both eliminate the need for scanners that can only ‘skim-test’ those bands that can’t be fully UE-tested, and gain complete insight into all aspects of service quality and performance of every band.
UE-based testing of every deployed band produces complete QMDL log files containing all of the RF metric data that engineers and designers need to maximize spectral efficiency, eliminate coverage holes, and optimize network configuration and the use of network features such as CA.
Because CERNOᵀᴹ records all measurement data output by the Qualcomm modems at the modems’ line output rate without binning or averaging – as is the case with legacy test tools – your measurement data is of the highest possible quality.
All log files are automatically processed when uploaded to the Ranlytics cloud, and all extracted RF metric data is persistently stored and made available immediately for auto-generation of walk test reports, and for map-based querying and analysis of drive test data. All within minutes of log file upload.
